Please note: This project is no longer active. The website is kept online for historic purposes only.
If you´re looking for a Linux driver for your Atheros WLAN device, you should continue here .
Version 1 (modified by matt, 14 years ago)
created from FAQ

How do I get my card to use turbo mode?

Copied from a madwifi-users posting.

  1. Set your AP to static turbo mode. (Unfortunately, 108 Mbps support does not work with dynamic turbo mode yet. This means that non-turbo cards will not be able to assoc with your AP, and also madwifi cards not in turbo modes won’t be able to see it.)
  2. Issue the following commands:
    iwpriv ath0 mode 3 (this forces it to G-only mode)
    iwpriv ath0 turbo 1 (enable turbo)