Please note: This project is no longer active. The website is kept online for historic purposes only.
If you´re looking for a Linux driver for your Atheros WLAN device, you should continue here .

Changes between Version 8 and Version 9 of UserDocs/TurboMode

Author:
p0g0 (IP: 0.0.0.0)
Timestamp:
10/08/06 23:34:27 (13 years ago)
Comment:

glomming lsf's turbo talk...

Legend:

Unmodified
Added
Removed
Modified
  • UserDocs/TurboMode

    v8 v9  
    33See [wiki:ChipsetFeatures/SuperAG#TurboMode here] for a short explanation of what turbo mode is. 
    44 
    5 You can set your card to static turbo mode in master, managed and ad-hoc mode. Unfortunately, the driver does not support dynamic turbo mode yet. This means that non-turbo cards will not be able to associate with your AP, and also MadWifi cards not in turbo modes ( or, apparently, other makes of cards) won’t be able to see it. 
     5You can set your card to '''static''' turbo mode in master, managed and ad-hoc mode. Unfortunately, the ''driver does not support dynamic turbo mode'' yet. This means that non-turbo cards will not be able to associate with your AP, and also MadWifi cards not in turbo modes ( or, apparently, other makes of cards) won’t be able to see it. 
     6 
     7Turbo mode is just a double channel (2*20MHz). If the driver is set to 54 mbit rate (static, no auto) and one enables turbo, that will give you 108 mbit link speed. 
     8'''There is no reported rate called 108 mbit''', in turbo mode the real rate is the reported rate*2. 
    69 
    710One may need to set the countrycode ( [wiki:UserDocs/CountryCode] ) to 0 to get turbo mode working.