Please note: This project is no longer active. The website is kept online for historic purposes only.
If you´re looking for a Linux driver for your Atheros WLAN device, you should continue here .

Changes between Version 3 and Version 4 of UserDocs/TurboMode

Author:
mrenzmann (IP: 0.0.0.0)
Timestamp:
11/23/05 11:02:36 (14 years ago)
Comment:

Removed question; added link to explanation of turbo mode; marked possible FIXME issue

Legend:

Unmodified
Added
Removed
Modified
  • UserDocs/TurboMode

    v3 v4  
    11= How do I get my card to use turbo mode? = 
    22 
    3 You can set your card to static turbo mode in master, managed and ad-hoc mode. Unfortunately, the driver does not support dynamic turbo mode yet. This means that non-turbo cards will not be able to assoc with your AP, and also madwifi cards not in turbo modes won’t be able to see it. 
     3See [wiki:ChipsetFeatures/SuperAG#TurboMode here] for a short explanation of what turbo mode is. 
     4 
     5You can set your card to static turbo mode in master, managed and ad-hoc mode. Unfortunately, the driver does not support dynamic turbo mode yet (FIXME: is this still true for madwifi-ng?). This means that non-turbo cards will not be able to associate with your AP, and also MadWifi cards not in turbo modes won’t be able to see it. 
    46 
    57Issue the following commands: 
    810iwpriv ath0 turbo 1 # enable turbo 
    911}}} 
    10  
    11 (But what's turbo mode? jick)