Please note: This project is no longer active. The website is kept online for historic purposes only.
If you´re looking for a Linux driver for your Atheros WLAN device, you should continue here .

Changes between Version 1 and Version 2 of UserDocs/TurboMode

Author:
br1 (IP: 0.0.0.0)
Timestamp:
10/19/05 14:36:11 (14 years ago)
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • UserDocs/TurboMode

    v1 v2  
    11= How do I get my card to use turbo mode? = 
    22 
    3 Copied from a madwifi-users posting
     3You can set your card to static turbo mode in master, managed and ad-hoc mode. Unfortunately, the driver does not support dynamic turbo mode yet. This means that non-turbo cards will not be able to assoc with your AP, and also madwifi cards not in turbo modes won’t be able to see it
    44 
    5   1. Set your AP to static turbo mode. (Unfortunately, 108 Mbps support does not work with dynamic turbo mode yet. This means that non-turbo cards will not be able to assoc with your AP, and also madwifi cards not in turbo modes won’t be able to see it.) 
    6   2. Issue the following commands: 
     5Issue the following commands: 
    76{{{ 
    8 iwpriv ath0 mode 3 (this forces it to G-only mode
    9 iwpriv ath0 turbo 1 (enable turbo) 
     7iwpriv ath0 mode 3 # this forces it to G-only mode, but you can also use A mode (1)
     8iwpriv ath0 turbo 1 # enable turbo 
    109}}}