Madwifi in Linux Mint
The following are instructions I used in Linux Mint 4.0 Daryna Main Edition (Gnome).
If after booting Linux Mint you can get online through a wired connection all you have to install is the following:
Open a terminal in the folder you saved madwifi-source and install like this:
sudo dpkg -i madwifi-source_0.9.4~rc2-1_all.deb
During the process Linux Mint will also automatically download and install some dependencies needed by that package.
Then, install madwifi-tools like this
sudo apt-get install madwifi-tools
If you are not able to get online through a wired connection, you will have to use another PC to download all the packages and their dependencies that you will need, which later you will copy to a USB drive to access them when you boot the LiveCD.
Then you will download the following packages from the Ubuntu package search engine. In this case I filter the searches to show only packages for the gutsy distribution, which is current release which Linux Mint is based on.
With all those packages copied to the flash drive, and the flash drive connected to your target PC, boot Linux Mint, open a terminal in the folder containing the packages and install in the following order:
sudo dpkg -i libc6_2.6.1-1ubuntu9_i386.deb sudo dpkg -i libc6-i686_2.6.1-1ubuntu9_i386.deb sudo dpkg -i linux-libc-dev_2.6.22-14.52_i386.deb sudo dpkg -i libc6-dev_2.6.1-1ubuntu9_i386.deb sudo dpkg -i libstdc++6-4.1-dev_4.1.2-16ubuntu2_i386.deb g++-4.1_4.1.2-16ubuntu2_i386.deb sudo dpkg -i g++_4.1.2-9ubuntu2_i386.deb sudo dpkg -i build-essential_11.3ubuntu1_i386.deb sudo dpkg -i html2text_1.3.2a-3build1_i386.deb sudo dpkg -i debhelper_5.0.51ubuntu3_all.deb sudo dpkg -i module-assistant_0.10.11_all.deb sudo dpkg -i madwifi-source_0.9.4~rc2-1_all.deb sudo dpkg -i madwifi-tools_0.9.3+dfsg-1_i386.deb
Now you will use module assistant, which helpt to make the madwifi module installation easy.
sudo m-a prepare sudo m-a a-i madwifi
Finally, load the module:
sudo modprobe ath_pci
Your access point is On and already connected to the network, right? Well, so now you only have to configure the network connection.
Left click on the network icon (2 PCs) in the system tray and click on "Connect to other wireless networks".
Type in the name of your network (aka SSID).
Select the authentication type used by the access point from the dropdown list.
Enter your network password.
Finally, Linux Mint will ask you to enter a password for the keyring, where the network password will be saved to automate the log-in later.
Voila! You're on-line! Are you?