Please note: This project is no longer active. The website is kept online for historic purposes only.
If you´re looking for a Linux driver for your Atheros WLAN device, you should continue here .

Changes between Version 3 and Version 4 of UserDocs/AntennaDiversity

Author:
Mister_X (IP: 0.0.0.0)
Timestamp:
02/02/06 13:34:38 (14 years ago)
Comment:

corrected a typo

Legend:

Unmodified
Added
Removed
Modified
  • UserDocs/AntennaDiversity

    v3 v4  
    55== Receiver diversity == 
    66 
    7 The way receive antenna diversity works is that the radio hardware listens to the begginning of the incoming transmission (the preamble stuff) and compares the signal strength on both antennas. It then selects the stronger antenna and receives the body of the packet on that antenna. All this is performed in hardware, the driver can only enable/disable diversity, and if it's disabled it can select which antenna to receive on. 
     7The way receive antenna diversity works is that the radio hardware listens to the begining of the incoming transmission (the preamble stuff) and compares the signal strength on both antennas. It then selects the stronger antenna and receives the body of the packet on that antenna. All this is performed in hardware, the driver can only enable/disable diversity, and if it's disabled it can select which antenna to receive on. 
    88 
    99== Transmitter Diversity ==