Please note: This project is no longer active. The website is kept online for historic purposes only.
If you´re looking for a Linux driver for your Atheros WLAN device, you should continue here .

Changes between Version 2 and Version 3 of FAQ/CountryCode

Author:
Mister_X (IP: 0.0.0.0)
Timestamp:
06/11/06 02:21:50 (11 years ago)
Comment:

madifi -> madwifi

Legend:

Unmodified
Added
Removed
Modified
  • FAQ/CountryCode

    v2 v3  
    2323The values for regdomain don’t follow any ISO scheme, but are manufacturing codes introduced by Atheros. There is no publically available list of valid regdomain codes and their meaning, but since it isn’t possible to change/override the regdomain EEPROM settings this doesn’t matter anyway. 
    2424 
    25 == Why does Madifi not determine the regdomain and countrycode from beacon packets, like the NDIS wrapped Atheros windows driver does? == 
     25== Why does Madwifi not determine the regdomain and countrycode from beacon packets, like the NDIS wrapped Atheros windows driver does? == 
    2626 
    27 Madifi supports more modes than just station and ad-hoc. If a Madwifi driven card is being used in master mode (i.e. as an AP) then looking at beacon packets is clearly inappropriate, since they will have been produced by the madwifi driver itself. 
     27Madwifi supports more modes than just station and ad-hoc. If a Madwifi driven card is being used in master mode (i.e. as an AP) then looking at beacon packets is clearly inappropriate, since they will have been produced by the madwifi driver itself. 
    2828 
    2929== Can an incorrect countrycode or regdomain lead to poor bit rates? ==