Belkin
F5D7010ecE ver. 1000
| Chipset: | AR5005G (802.11b/g) |
| Interface: | Cardbus |
| Antenna Connector: | Internal |
| Device Information: | Unknown |
| Notes: | Being sold as MICRADIGITAL 802.11g Wireless CardBus Adapter (noname product) |
F5D7000 ver. 5000
| Chipset: | AR5212 (802.11b/g) |
| URL: | http://catalog.belkin.com/... |
| Interface: | PCI |
| Antenna Connector: | Reverse SMA |
| Device Information: | 168C:001A (The box shows the Atheros chip below the Belkin cover.) |
F5D7000 ver. 5100
| Chipset: | AR5005G 802.11abg NIC |
| URL: | http://catalog.belkin.com |
| Interface: | PCI |
| Antenna Connector: | Reverse SMA |
| Device Information: | Atheros Chip labeled as Atheros AR2413A-001 |
| Notes: | Madwifi works great on Suse 10.1. After installing Madwifi drivers per instructions, used Yast and Network Manager to set up card. Belkin card was identified but not configured so I did not have to add, only edit configuration. Once complete, Network Manager brought up wireless link and I was able to connect to internet. Very simple process if Madwifi instruction are followed. |
F5D7000 ver. 6000
| Chipset: | RALink NIC |
| Interface: | PCI |
| Antenna Connector: | ? |
| Notes: | Also known as 7000UK. I've just bought one of these, and the chipset is from RALink. I haven't tested with MADWifi, because that would be an exercise in futility. |
F5D7010 ver. 8000
| Chipset: | AR5007G |
| Interface: | Cardbus |
| Antenna Connector: | Internal |
| Device Information: | Unknown |
| Notes: | Ubuntu 8.10 - not working. Loaded linux-backports-modules-intrepid-generic, still no luck |
F5D7010 ver. 5000
| Chipset: | AR5212 (802.11b/g) |
| Interface: | Cardbus |
| Antenna Connector: | Internal |
| Device Information: | Unknown |
| Notes: | Works just fine on Zenwalk (Slackware based). Module loads at boot. |
F5D7050 Ver.4000
| Chipset: | Zydas 1211b (802.11b/g) |
| URL: | |
| Interface: | USB |
| Antenna Connector: | Internal |
| Device Information: | 168c:0013 (Subsystem 1799:3010) |
| Notes: | Test on ubuntu 6.06LT to connect to wep AP, not more tested yet |
F6D3000
| Chipset: | AR5212 (802.11a/b/g) |
| URL: | http://catalog.belkin.com |
| Interface: | PCI |
| Antenna Connector: | |
| Device Information: | Unknown |
| Notes: | Tested with WEP using wpa_supplicant and kernel 2.6.17-r4. Works great with madwifi |
F6D3010
| Chipset: | AR5212 (802.11a/b/g) |
| URL: | |
| Interface: | Cardbus |
| Antenna Connector: | Internal |
| Device Information: | 168c:0013 (Subsystem 1799:3010) |
| Notes: | Works fine with madwifi and kernel 2.6.17-rc5, although only WPA (wpa_supplicant) tested. |
"My Essentials" PCMCIA card (ME1002-NB)
| Chipset: | AR5212 (802.11a/b/g) |
| URL: | http://www.myessentialssupport.com/product/?pid=ME1002-NB |
| Interface: | Cardbus |
| Antenna Connector: | None |
| Notes: | Worked perfectly with Debian Etch (4.0), using steps found on UsersDocs/Distro/Debian/Madwifi?. WPA with AES encryption works perfectly (I'm typing this on the connected laptop) |
