get_noackpolicy - Get WMM NoAck Policy Bit Value

Number of Input Arguments: 2

Number of Returned Arguments: 1

Default Value: N/A

Resets State Machine After Command: No

This command retrieves the NoAck Policy bit value in the current AP WMM parameter set. The get_noackpolicy command must be followed by 2 values. The first value is the access class (AC) number as defined in Table . The second value indicates the NoAck policy value is from the AP parameter set, thus the second value should be 0.

Example:The following command gets the NoAck Policy bit value in the AP parameter set for the BE AC.

myprompt# iwpriv ath0 get_noackpolicy 0 1
ath0 get_noackpolicy:0