Please note: This project is no longer active. The website is kept online for historic purposes only.
If you´re looking for a Linux driver for your Atheros WLAN device, you should continue here .

Ticket #1424 (new enhancement)

Opened 14 years ago

Last modified 14 years ago

The bitrate get stuck at 12M when the station switch from AP working on half/quarter channel to full one

Reported by: Tomasz Rostanski <rozteck@interia.pl> Assigned to:
Priority: minor Milestone: version 0.9.4
Component: madwifi: driver Version: trunk
Keywords: Cc:
Patch is attached: 1 Pending:

Description

I'm using madwifi with 4.9GHz cards (Ubiquiti SR4) and when I have the situation as follows: - bitrate is set to auto - the station is connected to AP1 on 5MHz channel - the stations roams to the AP2 which works on 20MHz channel - the bitrate get stuck on 12M after roaming - iwlist ath0 rate returns wrong list of available bitrates - the bug is not connected with the rate module

Attachments

half_quarter_stuck_rate.diff (0.7 kB) - added by rozteck@interia.pl on 06/29/07 16:14:30.
Update the rates when reconnecting to the AP

Change History

06/29/07 16:14:30 changed by rozteck@interia.pl

  • attachment half_quarter_stuck_rate.diff added.

Update the rates when reconnecting to the AP

06/29/07 16:16:42 changed by rozteck@interia.pl

I did a mistake writing the description - I wasn't roaming the station but changing the channel on the AP which is causing the station to reassociate on another channel.

07/02/07 06:31:44 changed by mrenzmann

  • milestone set to version 0.9.4.

Thanks for the patch. Please sign it off so that we can commit it after review.

07/02/07 11:26:17 changed by rozteck@interia.pl

Signed-off-by: Tomasz Rostanski <rozteck@interia.pl>