Please note: This project is no longer active. The website is kept online for historic purposes only.
If you´re looking for a Linux driver for your Atheros WLAN device, you should continue here .

Ticket #191: hostapd-ath1.conf

File hostapd-ath1.conf, 0.6 kB (added by dimitris@NoGSMaiPaml.com, 14 years ago)

hostapd config for open AP

Line 
1 interface=ath1
2
3 driver=madwifi
4
5 logger_syslog=-1
6
7 logger_syslog_level=2
8
9 logger_stdout=-1
10
11 logger_stdout_level=2
12
13 debug=0
14
15 dump_file=/tmp/hostapd.dump
16
17 ctrl_interface=/var/run/hostapd
18
19 ctrl_interface_group=0
20
21 ssid=music
22
23 macaddr_acl=0
24
25 #accept_mac_file=/etc/hostapd/accept
26
27 #deny_mac_file=/etc/hostapd/deny
28
29 # bit 0 = Open System Authentication
30 # bit 1 = Shared Key Authentication (requires WEP)
31 auth_algs=1
32
33 eap_server=0
34
35 # This field is a bit field that can be used to enable WPA (IEEE 802.11i/D3.0)
36 # and/or WPA2 (full IEEE 802.11i/RSN):
37 # bit0 = WPA
38 # bit1 = IEEE 802.11i/RSN (WPA2) (dot11RSNAEnabled)
39 wpa=0
40